While you can find these programs pretty easily on the internet, you may have to log on to a forum or a download site to get the unblocking program. I figured I would put them all in one spot. My radio is the KG-UV3D model, but I am told the UV1 and UV2 models are the same but with different firmware – so the programs should all work on earlier models…
If you unlock the frequency ranges in your radio, you can then transmit on frequencies you probably aren’t licensed for. This is illegal and can get you in trouble. Also, while you can unlock the public safety channels, if the agency your trying to communicate with is using digital radios or a trunked system, your not going to be able to communicate.
FYI know what your doing…
The software is for windows, it may work on a mac with a windows emulator, but I haven’t tried it. Also the programming software has to find the right port, so you may hook it up and get an “failed” message, if that happens try again. It is not uncommon for me to have to try to download the radio setting two or three times to get everything connected. (You also need to buy a programming cable…)
|
Features: * Dual Band\Dual Frequency\Dual Display\Dual Standby * VHF&UHF, UHF&UHF or VHF&VHF working modes * Frequency Range: 136-174MHz & 400-470MHz * Work Mode: U-V , V-U , V-V , U-U Can Be Set Freely * DTMF Encoding Function * CTCSS / DCS Scan ( Digital / Analog ) * VOX Transmission * SOS Function * Bright Flashlight IIIumination * Band Can Be Set Freely on The Same Channel * VHF TX-UHF RX or UHF TX-VHF RX * Digital FM radio ( Automatic tuning and storing, radio frequency display ) * Wide/Narrow Bandwidth selection ( 25KHz / 12.5KHz ) * Priority Scan, Add Scanning Channel * 105 groups D.C.S/50 groups CTCSS * Stopwatch Function * Low-voltage voice prompt * Busy Channel Lockout Package: 1x Wouxun KG-UVD1P Radio 1x 7.4V 1700mah Li-ion Battery Pack. 1x Antenna. 1x Car Charger Cable 1x Belt Clip. 1x ENG Manual 1x Desktop Charger (100~240V )
|
Attachments
Wouxun Warranty Policy (0 B)
USBXP2000 (0 B)
USB DriverUSB7VISTA (0 B)
USB DriverSetup KGUV3D (0 B)
Programing SoftwareWouxun Unlock (0 B)
Unlocking SoftwareKG-UV3D-UserManual (8.5 MiB)
undefinedPowerwerxQuickStartReferenceSheet (1.4 MiB)
undefinedUSB7VISTA (2 MiB)
undefinedUSBXP2000 (2.9 MiB)
undefinedWouxunUnlock (56 KiB)
undefinedEyes Free Manual (29.4 KiB)
undefinedKG-UVD1P_eyes_free (26.3 KiB)
undefined


anyone know of any MAC software for this?
Thank you!!
what to put in the boxes to unlock uv2d
Nicely done! Thanks.